D-Link DCS-7010L User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Security Camera
  5. DCS-7010L
  6. User manual

D-Link DCS-7010L User Manual

Hd mini bullet outdoor network camera
Hide thumbs Also See for DCS-7010L:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
Version 1.2 | 04/09/2013

User Manual

HD Mini Bullet Outdoor Network Camera
DCS-7010L

Advertisement

Table of Contents
loading

Related Manuals for D-Link DCS-7010L

Summary of Contents for D-Link DCS-7010L

  • Page 1: User Manual

    Version 1.2 | 04/09/2013 User Manual HD Mini Bullet Outdoor Network Camera DCS-7010L...

  • Page 2: Manual Revisions

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change.

  • Page 3: Table Of Contents

    Live Video ................22 Device Management .............63 Playback .................23 System ................64 Settings ..................24 Firmware Upgrade ............65 Recording Settings ............25 Status ..................66 Advanced Settings ............27 Device Info ................66 Coniguration ................28 Logs ..................67 Using the Coniguration Interface ........28 Help..................68 D-Link DCS-7010L User Manual...
  • Page 4 DI/DO Speciications ..............69 Technical Speciications ............70 Safety Statements ..............73 D-Link DCS-7010L User Manual...

  • Page 5: Product Overview

    Section 1: Product Overview Product Overview Package Contents DCS-7010L HD Mini Bullet Outdoor Network Camera CAT5 Ethernet cable Power adapter CD-ROM with User Manual and software Quick Installation Guide Mounting Bracket and Mounting Kit If any of the above items are missing, please contact your reseller.

  • Page 6: Introduction

    Congratulations on your purchase of the DCS-7010L HD Mini Bullet Outdoor Network Camera. The DCS-7010L is a versatile and unique solution for your small oice or home. Unlike a standard webcam, the DCS-7010L is a complete system with a built-in CPU and web server that transmits high quality video images for security and outdoor surveillance. The DCS-7010L can be accessed remotely, and controlled from any PC/Notebook over your local network or through the Internet via a web browser.

  • Page 7: Features

    The built-in infrared LEDs enables night time viewing of up to 32 feet (10 meters). IP66 Weatherproof Housing The DCS-7010L uses an IP66 weatherproof housing, allowing you to rest assured that in the toughest of conditions, it will continue to provide round-the-clock surveillance.

  • Page 8: Hardware Overview

    The IR-Cut Removable sensor measures the lighting conditions and switches ICR Sensor between color and infrared accordingly IR LEDs Infrared LEDs illuminate the camera's ield of view at night Power/Status LED Indicates the camera's current status D-Link DCS-7010L User Manual...

  • Page 9: Cable Harness

    DI/DO Connector I/O connectors for external devices Audio Out (Green) Connects to a speaker Audio In (Red) Connects to a microphone Ethernet Port Connects to an RJ45 Ethernet cable or PoE cable to connect to your network D-Link DCS-7010L User Manual...

  • Page 10: Internal

    Micro SD Card Slot Insert a MicroSD card for Local storage for storing recorded image and video Note: For step-by-step instruction on how to insert an SD card please skip to "Installing an SD Card" on page 11. D-Link DCS-7010L User Manual...

  • Page 11: Installing An Sd Card

    Insert your MicroSD card into the slot with the notch oriented to the rear of the camera. Step 4: Replace the weatherproof sheath ensuring a tight it. Note: To ensure that the camera stays weatherproof, users are advised to ensure that the weatherproof sheath is secured irmly in place. D-Link DCS-7010L User Manual...

  • Page 12: Installation

    Connect your camera to your mydlink-enabled Cloud Router and Zero Coniguration will automatically conigure your DCS-7010L and automatically add the camera to your mydlink account. After the short time it takes to do this you can remotely access your camera from the www.mydlink.com website to manage and monitor your DCS-7010L.
  • Page 13 Click on the device name to continue. A summary and conirmation notiication will appear with the automatically conigured details. Make a note of the details and click OK to add the camera to your account. D-Link DCS-7010L User Manual...
  • Page 14 Your camera is now set up, and you can skip to "mydlink" on page 21 to learn more about the mydlink features of this camera, or to "Coniguration" on page 37 for advanced coniguration of your camera. D-Link DCS-7010L User Manual...

  • Page 15: Camera Installation Wizard

    Note: If the autorun program does not open, go to My Computer, browse to your CD drive, and double-click on the autorun.exe ile. D-Link DCS-7010L User Manual...

  • Page 16: Mac Users

    Within 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from connecting your hardware to coniguring your camera and registering it with your mydlink account. Note: mydlink portal requires Java to function correctly. For more guidelines, please refer to mydlink FAQ pages at https://eu.mydlink.com/faq/mydlink D-Link DCS-7010L User Manual...

  • Page 17: Manual Hardware Installation

    Attach the External Power Supply Attach the external power supply to the cable harness power coupler. Connect the adapter to a wall outlet or power strip. Ethernet Cable Pre attached Ethernet cable Power Cable Pre attached power cable D-Link DCS-7010L User Manual...

  • Page 18: Mounting The Camera

    Section 2: Installation Mounting the Camera The DCS-7010L is suitable for mounting to a wall using the bracket provided. Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard.

  • Page 19: Positioning The Camera

    Section 2: Installation Positioning the Camera The DCS-7010L can be adjusted to ensure optimal viewing when mounted by following the steps outlined.. Step 1 Using a Torx Security screwdriver, loosen the screw on the top of the camera housing. Step 2 Swivel the camera along it's horizontal axis until you achieve the desired angle.
  • Page 20 Section 2: Installation Step 4 Rotate the camera around its vertical axis by adjusting the base. Step 5 Rotate the camera to adjust for positioning by rotating the barrel. D-Link DCS-7010L User Manual...

  • Page 21: Mydlink

    After registering your DCS-7010L camera with a mydlink account in the Camera Installation Wizard. You will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following: Note: The above screenshot is representative only.

  • Page 22: Live Video

    Click on this button to engage the infrared Click on this button to toggle the audio stream on or Audio Brightness Adjust the slider control to account for brightness. Zoom Adjust the slider control to zoom in or out. D-Link DCS-7010L User Manual...

  • Page 23: Playback

    The Playback tab allows you to review pre-recorded footage captured to an inserted microSD card. Select the date of the footage you wish to preview from the drop down menu, then choose from the recordings available for playback. D-Link DCS-7010L User Manual...

  • Page 24: Settings

    Section 3: mydlink Settings The Settings tab contains several options for you to control how your DCS-7010L operates. Camera Name: Click on the Edit button to change how the camera name appears. mydlink No: This is the unique mydlink number for your device.

  • Page 25: Recording Settings

    Toggles notiication by email on or of. Video Clips Recording In the event that the microSD card can not store further recordings, Mode: the user can choose to record over previous recordings or to be notiied and cease recording. D-Link DCS-7010L User Manual...
  • Page 26 Toggles notiication by email on or of. Video Clips Recording In the event that the microSD card can not store further recordings, Mode: the user can choose to record over previous recordings or to be notiied and cease recording. D-Link DCS-7010L User Manual...

  • Page 27: Advanced Settings

    Section 3: mydlink Advanced Settings Show password: Checking this box will show the password. Advanced Setting: Clicking on the Advanced Setting button will open a secondary window allowing full coniguration of the DCS-7010L D-Link DCS-7010L User Manual...

  • Page 28: Coniguration

    After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web coniguration utility is designed to allow you to easily access and conigure your DCS-7010L. At the end of the wizard, enter the IP address of your camera into a web browser, such as Mozilla Firefox.

  • Page 29: Live Video

    Stop Stops the camera ePTZ motion Preset Path Starts the camera's motion along the predeined path ePTZ Speed: You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest. D-Link DCS-7010L User Manual...
  • Page 30 Listen/Stop Audio In (from microphone) Full screen mode Start/Stop Audio Out (to speaker) Taking a Snapshot Start/Stop Digital Output Go To: If any presets have been deined, selecting a preset from this list will (Preset List) display it. D-Link DCS-7010L User Manual...

  • Page 31: Setup

    To quickly conigure your Network Camera’s motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to"Motion Detection" on page 47. D-Link DCS-7010L User Manual...

  • Page 32: Internet Connection Setup Wizard

    Section 4: Coniguration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to conigure your new D-Link Camera and connect the camera to the internet. Click Next to continue. Note: Select DHCP if you are unsure of which settings to choose.
  • Page 33 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-7010L User Manual...
  • Page 34 Conigure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. Conirm the settings are correct and click Apply to save them.. The settings will be saved to the DCS-7010L and the camera will restart. D-Link DCS-7010L User Manual...

  • Page 35: Motion Detection Setup Wizard

    Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected. D-Link DCS-7010L User Manual...
  • Page 36 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-7010L User Manual...

  • Page 37: Network Setup

    Invalid gateway settings may cause the failure of transmissions to a diferent subnet. Primary DNS: The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary DNS. D-Link DCS-7010L User Manual...
  • Page 38 PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera. D-Link DCS-7010L User Manual...
  • Page 39 IP address, specify an optional router and an optional primary DNS. Enable Multicast for stream The DCS-7010L allows you to multicast each of the available streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults.

  • Page 40: Dynamic Dns

    DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-7010L User Manual...

  • Page 41: Image Setup

    Select the frequency used by your power lines to avoid interference or distortion. White Balance: Use the drop-down box to change white balance settings to help balance colors for diferent environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold. D-Link DCS-7010L User Manual...
  • Page 42 This setting controls the amount of coloration, from grayscale to fully saturated. Sharpness: Specify a value from 0 to 8 to specify how much sharpening to apply to the image. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-7010L User Manual...

  • Page 43: Audio And Video

    Maximum frame rate: A higher frame rate provides smoother motion for videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth. D-Link DCS-7010L User Manual...
  • Page 44 This setting controls the amount of gain applied to incoming audio to increase its volume. Audio out of: Selecting this checkbox will mute outgoing audio. Audio out volume level: This setting controls the amount of gain applied to outgoing audio to increase its volume. D-Link DCS-7010L User Manual...

  • Page 45: Preset

    Clicking the Remove button will delete the currently selected preset. Preset Sequence: This section allows you to create a preset sequence, which automatically moves the camera's view between a set of preset views. D-Link DCS-7010L User Manual...
  • Page 46 Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button. D-Link DCS-7010L User Manual...

  • Page 47: Motion Detection

    Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously speciied motion detection areas. D-Link DCS-7010L User Manual...

  • Page 48: Time And Date

    NTP server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-7010L with an Internet time server. Choose the one that is closest to your location. Set the Date and Time Manually: This option allows you to set the time and date manually.

  • Page 49: Event Setup

    Event Setup In a typical application, when motion is detected, the DCS-7010L sends images to a FTP server or via e-mail as notiications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection. When an event is triggered, a speciied action will be performed.
  • Page 50 1. To add a new item - "event, server or media," click Add. A screen will appear and allow you to update the ields accordingly. 2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. D-Link DCS-7010L User Manual...

  • Page 51: Add Server

    Enter the coniguration for the target e-mail server account. FTP: Enter the coniguration for the target FTP server account. Network Storage: Specify a network storage device. Only one network storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-7010L User Manual...

  • Page 52: Add Media

    You can set up to 7 post-event images to be taken. File name preix: The preix name will be added on the ile name. Add date and time suix to ile Check it to add timing information as ile name suix. name: D-Link DCS-7010L User Manual...
  • Page 53 This is the preix that will be added to the ilename of saved video clips. System log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-7010L User Manual...

  • Page 54: Add Event

    Triggers an event when the system boots up. Network Lost: Triggers an event when the network connection is lost. Time: Select Always or enter the time interval. Server: Specify the location where the event information should be saved to. D-Link DCS-7010L User Manual...

  • Page 55: Add Recording

    Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other iles in the same folder as recording iles. D-Link DCS-7010L User Manual...
  • Page 56 Time of each ile for recording: If this is selected, iles will be separated based on the maximum length you specify. File Name Preix: The preix name will be added on the ile name of the recording ile(s). D-Link DCS-7010L User Manual...

  • Page 57: Sd Card

    Playback Recorded Video: If video iles are stored on the SD card, click on the video folder and choose the video ile you would like to view. Refresh: Reloads the ile and folder information from the SD card. D-Link DCS-7010L User Manual...

  • Page 58: Advanced

    N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed." You may specify whether or not to illuminate the status LED on the camera. D-Link DCS-7010L User Manual...

  • Page 59: Icr And Ir

    The IR light will always be on. Sync: The IR light will turn on when the ICR sensor is on. Schedule: The IR light will turn on or of according to the schedule that you specify below. D-Link DCS-7010L User Manual...

  • Page 60: Https

    Create a certiicate request and install Status: Displays the status of the certiicate. Note: The certiicate cannot be removed while the HTTPS is still enabled. To remove the certiicate, you must irst uncheck Enable HTTPS secure connection. D-Link DCS-7010L User Manual...

  • Page 61: Access List

    Section 4: Coniguration Access List Here you can set access permissions for users to view your DCS-7010L. Allow list: The list of IP addresses that have the access right to the camera. Start IP address: The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera.

  • Page 62: Snmp

    Enable SNMP: Enable this option to allow local SNMP management. Read/Write Community Enter a name for the read community of your SNMP server. Read Only Community Enter a name for the write community of your SNMP server. D-Link DCS-7010L User Manual...

  • Page 63: Maintenance

    Enter a label for the camera, which will be shown on the OSD when it is enabled. Show Time: Select this option to enable the time-stamp display on the video screen. LED: You may specify whether or not to illuminate the status LED on the camera. D-Link DCS-7010L User Manual...

  • Page 64: System

    Load Coniguration. Restore to Factory Default: You may reset your camera and restore the factory settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-7010L User Manual...

  • Page 65: Firmware Upgrade

    Section 4: Coniguration Firmware Upgrade The camera's current irmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available irmware version. To upgrade the irmware on your DCS-7010L, please download and save the latest irmware version from the D-Link Support Page to your local hard drive.

  • Page 66: Status

    Section 4: Coniguration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-7010L User Manual...

  • Page 67: Logs

    Section 4: Coniguration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-7010L User Manual...

  • Page 68: Help

    Section 4: Coniguration Help This page provides helpful information regarding camera operation. D-Link DCS-7010L User Manual...
  • Page 69 Appendix A: DI/DO Speciications DI/DO Speciications D-Link DCS-7010L User Manual...
  • Page 70 ƒ QoS ƒ DNS client ƒ CoS ƒ DDNS client (D-Link) ƒ Multicast ƒ SMTP client ƒ IGMP ƒ FTP client ƒ ONVIF compliant Security Administrator and user group protection HTTP and RTSP digest encryption Password authentication D-Link DCS-7010L User Manual...
  • Page 71 Power Consumption 5.4 watts +- 5% Temperature Operating: -25 to 50 °C (-13 to 122 °F) Storage: -20 to 70 °C (-4 to 158 °F) Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensing Certiications CE LVD C-Tick D-Link DCS-7010L User Manual...
  • Page 72 Appendix A: Technical Speciications Dimensions • D-Link DCS-7010L User Manual...

  • Page 73: Safety Statements

    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. D-Link DCS-7010L User Manual...
  • Page 74 The availability of some speciic channels and/or operational frequency bands are country dependent and are irmware programmed at the factory to match the intended destination. The irmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link oice.

Table of Contents