Advertisement
8. To change the angle of the handle to 90 ° press the handle and the pole
together and turn it in clockwise direction. It will click into place at 90°.
9. After trimming, disassemble the extension pole and screw the protection cap
on the pole connection (6).
Cha nging the Ca rb on Brushe s
If the trimmer should fail to operate, firstly check there is power from the power
supply you have plugged the trimmer into. If the trimmer still fails to operate,
please check the fuse in the plug at the end of the 10m power cable. If trimmer
still fails to operate, unplug the trimmer from the power supply and change the
carbon brushes (part 18) as these wear out after extended use.
1. To change the carbon brushes, unscrew both, black caps (9) with a suitable
screwdriver and remove the caps. Behind the caps you will find the carbon
brushes.
2. Insert the new carbon brushes (originally included when trimmer first
supplied), into place and tighten the caps
Cha nging the Bla d e s
Replace the blades only if they are completely dull. Changing the blades demands
a little bit of skill. When ordering replacement parts you will get a detailed
instruction for changing the blades.
Any questions or problems – please call the Eckman Helpline on 0871 590 5917 or go to www.eckman.co.uk
Ope rating
8
Hide quick links:
Advertisement
