Changing The Blades - Eckman HT001 User Manual

(6). Do not immerse charger in water or any other liquid.
(7). WARING: don't allow any liquid to get inside charger. Electric shock may result. To facilitate the
cooling of the battery pack after use, avoid placing the charger or tool in a warm environment such as
in a metal shed, or an uninsulated trailer.

CHANGING THE BLADES

●
Warning!
DO NOT operate the switch whilst dismantling or fitting the blades. Risk of injury!
Fig. 11
(see Fig. 11)
The blade can be changed rapidly and easily without any tools.
1，To change the blade, you must first remove the Blade cover (A) at first. Follow the steps as shown
in the upper figure.
① Hold the machine in one hand as shown.. Lever the retainer (B) upwards with your thumb and
forefinger of another hand.
② Hold the blade cover firmly and pull it backwards.
③ Remove the blade cover upwards.
(see Fig. 12)
2，Take off the blade and install another blade.
9