Eckman HPT1 Instruction Manual page 7

Do not pull the trimmer by the cord. Make sure the power cord cannot get

caught in any way.
When cleaning, during maintenance, or when not in use always, disconnect

from the power supply.
Use only extension cables which are approved for outdoor operation. Use

approvable extension cable with a cable quality of H07 RN -F; 3-1.5 mm2. Ask
your electrician.
For your added safety, we highly recommend the use of an RCD (Residual

Current Detector) when operating the trimmer.
The blades are very sharp. Do not touch the blades during use and keep

fingers, hair, clothing and similar objects away from the blades.
Do not attempt to remove cut material from the blades or to hold material to

be cut when the blades are running. Remove jammed material from the blades
after switching off and unplugging. A moment of inattention while operating
the hedge trimmer may result in serious personal injury.
Keep the blades always sharp and clean. Replace defective or completely worn

blades with original parts only.
Do not force the trimmer while cutting. Allow to hedge trimmer to work at the

rate for which it was designed.
Have sufficient rests!

The extension pole supplied is designed only for use with this hedge trimmer.

Any questions or problems – please call the Eckman Helpline on 0871 590 5917 or go to www.eckman.co.uk
Safe ty Note s
3