Eckman HPT1 Instruction Manual page 10

Ma ke sure to ke e p p rop e r footing while op e ra ting the trimme r .
8. Before adjusting the angle of inclination, disconnect from power mains.
Before cutting bushes, shrubs or hedges, remove thick branches or similar

material. Make sure that there are no small animals hidden in the bushes
or hedges.
There are different cutting techniques and certain seasons to be observed

when trimming hedges or bushes. For detailed information see appropri-
ate technical literature.
Please note the local rest periods when working with the hedge trimmer in

order to avoid disturbances.
Below you will find some hints on trimming hedges:
If a hedge has to be cut back very substantially, trim the hedge in two

passes.
First cut the hedge to the desired height and stretch a

string along the hedge at the desired height. Guide the
blades of the hedge trimmer at an angle of 10 – 15° to
the hedge in order to get a straight cut.
Trim the hedge to a trapezoidal shape cutting from the

bottom to the top.
Round the top edges of the hedge.

Finally trim the bottom edges back.

Appropriately dispose of cut materials.

Any questions or problems – please call the Eckman Helpline on 0871 590 5917 or go to www.eckman.co.uk
Ope rating
6
correct