Message Alert Tone - AT&T CL83101 User Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds.
the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
the main menu.
2. Press q or p
CID
press /�ELECT.
MENU
3. Press q or p
CID
press /�ELECT.
MENU
4. Press q or p
CID
/�ELECT.
press
MENU
5. Press q or p
CID
6. Press /�ELECT to save the setting. You hear a confirmation tone.
MENU
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
�ELECT
2. Press q or p
CID
press /�ELECT.
MENU
3. Press q or p
CID
press /�ELECT.
MENU
4. Press q or p
CID
press /�ELECT.
MENU
5. Press q or p
CID
6. Press /�ELECT to save the setting. You hear a confirmation tone.
MENU
NOTES:
• The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
• To temporarily turn off the message alert tone, see page 79.
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to scroll to >Msg alert tone, then
DIR
to choose >On or >Off.
DIR
to enter the main menu.
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to scroll to >Msg alert tone, then
DIR
to choose >On or >Off.
DIR
�ELECT
75
Unless you change it,
to enter
Remote code
Msg alert tone
>
MSG ALERT TONE
>On
Remote code
Msg alert tone
>
p
q
MSG ALERT TONE
>On
p
q
p
q
p
q