5 - Information / Configuration
5.7.2.3
Ethernet over ATM – IP over Ethernet (IPoE)
•
Select the WAN service type IP over Ethernet (IPoE).
Field
Enter Service description
Enter 802.1P Priority
Enter 802.1Q VLAN ID
Enable IPv6 for this
service
•
Click on the Next button to continue configuring the WAN service.
10
These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX Mode.
Page 5-28
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_ Index _ VCI
For example: ipoe_0_0_35.
Note: You may enter another service name.
10
Enter a value for the 802.1P Priority. This value
is between 0 and 7.
10
Enter a value for the 802.1QVLAN ID. This
value is between 0 and 4094.
Check this box to enable IPv6 for this service.
Action
Default
value
ipoe_0_0_35
-1
-1
Not checked