Hiding Chapters; Dividing A Title; Protecting Titles - Toshiba RDXV49DTKF Owner's Manual

E3TK0FD_EN.book Page 62 Monday, March 9, 2009 10:00 AM

Hiding Chapters

DVD+RW DVD+RW DVD+RW
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Press [DVD] first.
1
Follow the steps 1 to 3 in "Editing Title Name"
on page 60.
2
Select "Hide Chapter" using [K \ L], then press
[ENTER\OK].
3 Use [SKIP H \ G], [PLAY B] and [PAUSE F]
to decide the chapter to be hidden.
4
Select "Hidden" using [K \ L], then press
[ENTER\OK].
5
Press [RETURN] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
If you want hidden chapters to be "Visible", select the
chapter to be shown. Then use [K \ L] to select
"Visible" at the step
Data will be written onto the disc momentarily.
Note
• "Hidden" will be displayed in the preview window while
previewing the hidden chapter.
• When you make all chapters in the title "Hidden", "Hidden" is
displayed in a thumbnail of the title list.

Protecting Titles

HDD HDD HDD
Original
To prevent the accidental editing or erasing of the titles, you
can protect them in the Original menu.
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
1
Follow the steps 1 to 3 in "Editing Title Name"
on page 60.
2
Select "Protect" using [K \ L], then press
[ENTER\OK].
3
Press [ENTER\OK] again.
For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
• If the title is already protected, "ON A OFF" will appear
instead. Press [ENTER\OK], to release the title from
protection.
• The protected title will be marked with
4
Press [RETURN] repeatedly to exit.
For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
To protect a whole disc
(VR mode DVD-RW and DVD+RW/+R discs only):
Select "Disc Protect OFF A ON" from "DVD Menu", then
select "Yes". Refer to "Setting a Disc to Protect" on
page 45.
62
EN
Downloaded From Disc-Player.com Toshiba Manuals
DVD+R DVD+R DVD+R
4
on this page.
VR
DVD-RW DVD-RW DVD-RW
Original
icon.

Dividing a Title

VR
HDD HDD HDD
DVD-RW DVD-RW DVD-RW DVD+RW DVD+RW DVD+RW
Playlist
You can divide a title into two new titles.
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
1
Follow steps 1 to 3 in "Editing Title Name" on
page 60.
2
Use [SKIP H \ G], [REV E], [FWD D],
[PLAY B] and [PAUSE F] to find where you
want to divide the title.
3 Select "Title Dividing" using [K \ L], then press
[ENTER\OK].
4
Select "Yes" using [K \ L], then press
[ENTER\OK].
The title is divided into two new titles with the same title
names.
For DVD+RW : Writing onto the disc starts. It may take
awhile to write the data on a disc.
For HDD and VR mode DVD-RW disc
: Proceed to step
5
Press [RETURN] to exit.
For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
• You cannot divide a title of the disc when the number of
recording titles reaches the maximum of 600 (HDD), 99
(-RW) or 49 (+RW), or the number of recording chapters
reaches the maximum of 999 (-RW) or 254 (+RW).
• If there is not enough recordable space left in HDD, you
cannot divide a title of the HDD Original.
5
.