6
Troubleshooting
IMPORTANT: Your camera offers an on-board Help system. To get the most from your
camera,
Camera problems
Status
Camera does not
turn on
Camera does not turn
off
Camera buttons and
controls do not
function
In Review, a blue or
black screen is
displayed instead of
a picture
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
Memory card is almost
or entirely full
The battery does not
charge using USB
charging
www.kodak.com/go/support
see page
49.
Solution
■
Make sure the battery is charged and installed correctly (see
page
1).
■
Turn the camera off, then on again.
■
Transfer all pictures to the computer (see
■
Take another picture.
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed (see
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer (see
■
Delete pictures from the card or insert a new card.
■
See
page 2
or visit
■
Insert a new battery (see
www.kodak.com/go/USBcharging.
page
1).
page
37).
page
7).
page
37).
45