Using The Self-Timer - Kodak EASYSHARE M1093 IS Extended User Manual

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
NOTE: In Panoramic modes
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Using burst
Use burst to take up to 3 pictures in quick succession. (Burst is not available in
Panorama mode.)
www.kodak.com/go/support
1 In any picture-taking mode, press
desired self-timer
10 seconds—A picture is taken after a 10-second
delay (so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second
delay (for a steady, shutter release on a tripod).
2 shot—The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds later.
2 Compose the scene. Press the Shutter button
halfway, then completely down.
The camera takes the picture/pictures after the delay.
(page 35), only the 2- and 10-second options are available.
1 In any picture-taking mode, repeatedly press
until the Burst icon appears at the top of the LCD.
2 Press the Shutter button halfway to focus and set
exposure. Press the Shutter button completely
down and hold it to take pictures.
Taking pictures/videos
until the
icon appears for:
11