Kodak EASYSHARE M1093 IS Extended User Manual page 35

Press Menu,
and OK to access settings
AF Control
Choose an auto-focus setting.
Focus Mode
Select a large or concentrated
area of focus.
Using the capture + tab
Press Menu,
and OK to access settings
White Balance
Choose your lighting
condition.
Available in Smart Capture
mode.
www.kodak.com/go/support
, ,
Continuous AF—because the camera is always focusing,
there is no need to press the Shutter button halfway down to
focus.
Single AF—uses TTL-AF (through-the-lens auto focus) when
the Shutter button is pressed halfway down.
Auto—for general picture-taking.
Macro—for sharpness and detail in pictures at close range.
Use available light instead of flash, if possible. The camera
automatically sets the focus distance depending on the zoom
position.
Infinity—for distant subjects; auto-focus framing marks are
unavailable.
, ,
Auto—automatically corrects white balance. Ideal for general
picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs.
Ideal for indoor pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—for pictures in shade in natural lighting.
Doing more with your camera
Capture Options
Capture + Options
29