Troubleshooting
Status
Battery life is short
You cannot take a
picture
Error message appears
on LCD
Memory card not
recognized or camera
freezes with card
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
46
Solution
■
Make sure the correct battery type is installed (see
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery (see
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way (see
■
Insert a new or charged battery (see
■
Memory is full. Transfer pictures to the computer (see
delete pictures (see
■
Turn the camera off, then on again.
■
Remove the memory card.
■
Turn off the camera. Remove the battery. Wipe the contacts with
a clean, dry cloth.
■
Insert a new or charged battery.
■
If the problem still exists, get help (see
■
Card may be corrupted. Format the card in the camera
page
34).
■
Use another memory card. Only SD or SDHC cards are supported.
■
To view pictures on a card or in internal memory,
Solution
■
See Help in EasyShare software.
■
Adjust the camera Video Out setting to NTSC or PAL
page
33).
■
Make sure the external device settings are correct. (See the
device's user's guide).
page
page
page
14), or insert another card.
www.kodak.com/go/support
page
56).
1).
page
5).
1).
page
page
49).
(see
see page
(see
37),
13.