Care And Maintenance - Kodak EASYSHARE M1093 IS Extended User Manual

Appendix
Exposure compensation—+/-2.0 EV with 1/3 EV step
Burst mode—Maximum 3 pictures @ 1.5 fps; Auto Exposure, Auto Focus, Auto
White Balance executed for first shot only
Communication with computer—USB 2.0 high speed (PIMA 15740 protocol);
via USB cable model U-8; EasyShare camera dock, printer dock, or HDTV dock
Video output—NTSC or PAL
PictBridge support—Yes
Power—Kodak Li-Ion rechargeable digital camera battery KLIC-7004; 5V AC
adapter; EasyShare camera dock, printer dock, or HDTV dock
Size—3.7 x 2.3 x 0.8 in. (95.2 x 58.5 x 21.4 mm) @ power off
Weight—4.4 oz (126 g) without card or battery
Operating temperature—32–104
Tripod mount—1/4 inch

Care and maintenance

■ If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
■ For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
www.kodak.com/go/m1093support
54
° °
F (0–40 C)
www.kodak.com/go/support
www.eiae.org or