Kodak EASYSHARE M1093 IS Extended User Manual page 54

Troubleshooting
Status
Picture is too light
Direct printing (PictBridge enabled printer) problems
Status
Cannot find the
desired picture
The Direct printing
menu interface turns
off
Cannot print pictures
Camera or printer
display an error
message
48
Solution
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (see
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 52.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program and Panorama modes, adjust the Exposure
Compensation (see page
Solution
■
Use the Direct printing menu to change the image storage location.
■
Press any camera button to redisplay the menu.
■
Make sure there is a connection between the camera and the
printer (see page
■
Make sure the printer and the camera have power.
■
Follow the prompts to resolve the issue.
page 7).
27).
39).
www.kodak.com/go/support