Main Power switch
Main Power switch
Introduction
The main power switch is at the back side of the scanner.
Switch the scanner ON and OFF
#
Action
1
Press the upper half of the switch
(marked "I") to turn the mains
power to ON.
2
Press the lower half of the switch
(marked "0") to turn the main
power to OFF.
Selftest procedure
#
Step
Action
1
When you turn the mains power
ON, the scanner runs a short
self-test procedure.
This takes less than a minute.
The 3 LEDs on the panel will be
lighted during the self-test proce-
dure.
22
Chapter 4 - Switch the scanner ON and OFF
Remarks
Remarks