Table of Contents
Advertisement
GSX-86 Device Specific Information
K-42
COLOR
GENERALIZED
DRAWING
PRIMITIVES (GDPS)
ESCAPES
Colors are referred to on the STROBE Model 100 by
the number of the pen and not by the pen holder.
This gives the flexibility of more than one color on
the plotter. By default, the pen holder is assumed to
be empty when the plotter is initialized, so you are
prompted to insert pen 1 into the pen holder. If you
wish to use any other color, a prompt is generated
telling you to insert the desired color in the pen
holder and then press RETURN to continue. The
index parameter in the routines that refer to a color
index corresponds to a pen number not to the pen
holder (i.e., index 1 corresponds to pen 1, index 2 to
pen 2, index 3 to pen 3 ... ). There is no limit to the
number of pen indices available on the plotter.
No GDPs are available on the STROBE Model 100.
The required escape function is available on this
device.
Advertisement
Table of Contents
