Wireless Access Control - Belkin BoB User Manual

Chapter 5 : Advanced Setup
BoB Advanced Setup Method
TM

Wireless Access Control

Using the Access Control functionality, you can specify which PCs can wirelessly connect to the access point.
Each PC has a unique identifier known as a Medium Access Control (MAC) address. With MAC filtering enabled,
only the computers whose MAC address you have listed in the filtering table may connect to the router.
See the description of the Access Control features below.
Parameter Description
Enable MAC Filtering: Enable or disable the MAC filtering function.
Access Rule for registered MAC address: When MAC filtering is enabled, all registered MAC addresses are
controlled by this Access Rule.
MAC Filtering Table: Enter the MAC addresses of the network card you wish to allow or deny connection (Up to
32 stations).
Page 21