Snmp; Community - Belkin BoB User Manual

Chapter 5 : Advanced Setup
BoB Advanced Setup Method
TM

SNMP

On this page you can enable the SNMP (Simple Network Management Protocol) functions for LAN, WAN or both
LAN and WAN. By default it is set to disabled.

Community

Use the SNMP configuration screen to display and modify parameters for the Simple Network Management
Protocol (SNMP). A computer attached to the network, called a Network Management Station (NMS), can
be used to access this information. Access rights to the agent are controlled by community strings. To
communicate with the router, the NMS must first submit a valid community string for authentication.
Parameter Description
Community A Community name authorised for management access
Access Management access is restricted to Read or Write
Valid Enables or disables the entry
Note: Up to 5 community names may be entered
Page 41