Using Receive Modes; Fax Only; Fax/Tel; Manual - Brother MFC-J2310 User Manual

Chapter 5

Using Receive Modes

Some Receive Modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the Ring Delay before using these
modes. (See Ring Delay on page 45.)

Fax Only

Fax Only mode will automatically answer
every call as a fax call.

Fax/Tel

Fax/Tel mode helps you automatically
manage incoming calls by recognising
whether they are fax or voice calls and
dealing with them in one of the following
ways:
 Faxes will be automatically received.
 Voice calls will start the F/T Ring to tell you
to pick up the line. The F/T Ring is a fast
double-ring made by your machine.
(For more information, see F/T Ring Time
(Fax/Tel mode only) on page 45 and Ring
Delay on page 45.)
44

Manual

5
To receive a fax in Manual mode, lift the
handset of an external telephone or press
Hook. When you hear fax tones (short
repeating beeps), press Fax Start and
choose Receive. You can also use the Fax
Detect feature to receive faxes by lifting a
handset on the same line as the machine.
5
(For more information, see Fax Detect
on page 46.)

External TAD

5
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in one
of the following ways:
 Faxes will be automatically received.
Voice callers can record a message on the

external TAD.
(For more information, see Connecting an
external TAD (telephone answering device)
on page 54.)
5
5