Paper Size And Type (Mfc-J4610Dw); Tray Use In Copy Mode (Mfc-J4610Dw) - Brother MFC-J2310 User Manual

Chapter 2
Paper Size and Type
(MFC-J4610DW)
To get the best print quality, set the machine
for the type of paper you are using.
You can use the following sizes of paper for
printing copies: A4, A5, A3, 10  15 cm,
Letter, Legal and Ledger and two sizes for
printing faxes: A4 or Letter. When you load a
different size of paper in the machine, you will
need to change the paper size setting at the
same time so your machine can fit an
incoming fax on the page.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display General Setup.
c
Press General Setup.
d
Press s or t to display
Tray Setting.
e
Press Tray Setting.
f
Press Tray #1 or Tray #2.
g
Do one of the following:
 If you press Tray #1, set the paper
size and type you want to set.
Press Paper Size.
Press s or t to display the paper
size options, A4, A5, 10x15cm or
Letter and press the size you want
to set.
Press Paper Type.
Press s or t to display the paper
type options, Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency
and press the type you want to set.
 If you press Tray #2, set the paper
size you want to set.
Press Paper Size.
Press the paper size A4 or Letter
you want to set.
30
h
Press .
2
NOTE
• You can use only plain paper in Tray #2.
• The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
• When you copy using A3, Legal or Ledger
size paper, set the paper size option in
Copy mode.
Tray use in Copy mode
(MFC-J4610DW)
You can change the default tray the machine
will use for copies.
Auto Tray Select will allow your machine
to feed paper from either Tray #1 or Tray #2,
using the paper type and size settings from
the Copy Settings table.
To change the default setting follow the
instructions below:
a
Press
b
Press s or t on the Touchpanel to
display General Setup.
c
Press General Setup.
d
Press s or t to display
Tray Setting.
e
Press Tray Setting.
f
Press s or t to display
Tray Use: Copy.
g
Press Tray Use: Copy.
h
Press Tray #1, Tray #2 or
Auto Tray Select.
(Settings).
2