Receiving A Fax; Receive Modes - Brother MFC-J6910DW Basic User's Manual

5

Receiving a fax

Receive modes

By factory default, the factory setting of Receive Mode is "Fax". Your machine will automatically
receive any faxes that are sent to it. There are four receive modes of this machine as below.
For more detailed information on the receive modes, see Using receive modes on page 37.
Operation Display
Fax Only
Fax/Tel
Manual
External TAD
To set a receive mode follow the instructions below:
a
Press MENU .
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Receive Mode.
e
Press Receive Mode.
f
Press Fax Only, Fax/Tel, Manual or External TAD.
g
Press Stop/Exit.
The LCD will display the current receive mode.
36
LCD Display
Fax
F/T
Mnl
TAD
Factory Default Ring Delay
Ring Delay: 2 times
Fax detection: On
Ring Delay: 2 times
Time: 30 seconds
5
5