Chapter 6
e
Press Setup Receive.
f
Press s or t to display
Remote Codes.
g
Press Remote Codes.
h
Press On.
i
Do one of the following.
If you want to change the Remote
Activation Code (Act.Code), enter
the new code.
Press OK, go to step j.
If you do not want to change the
Remote Activation Code, press OK,
go to step j.
j
Do one of the following.
If you want to change the Remote
Deactivation Code (Deact.Code),
enter the new code.
Press OK, go to step k.
If you do not want to change the
Remote Deactivation Code, press
OK, go to step k.
k
Press
.
NOTE
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.
58