Konica Minolta bizhub 20P User Manual page 83

Control Panel
LED Printer status
Receiving data
The printer is either receiving data from the computer, processing data in memory
or printing the data.
The Status LED will turn on for 0.5 seconds and off for 0.5 seconds.
Cooling down
The printer is cooling down. Wait for a few seconds until inside of the printer has
cooled down.
4
The Status LED will turn on for 1 second and off for 1 second.
Data remaining in memory
There is remaining print data in the printer memory. If the yellow Status LED is on
for a long time and nothing has printed, press Go to print the remaining data in
memory.
Toner low
Indicates that the toner cartridge is near the end of its life. Buy a new toner cartridge
and have it ready for when Replace Toner is indicated.
The Toner LED will turn on for 2 seconds and off for 3 seconds.
Replace toner
Replace the toner cartridge with a new one. See Replacing the toner cartridge on
page 90.
Cartridge error
The drum unit assembly is not installed correctly. Take the drum unit out of the
machine and put it back in.
No toner
Open the front cover, install the toner cartridge. See Toner cartridge on page 89.
73
Downloaded From ManualsPrinter.com Manuals