Konica Minolta bizhub 20P User Manual page 148

Print surface
The characteristics of the face side and reverse side of a sheet of paper may vary a little.
Usually, the opening side of the paper ream package is the print side. Follow the indications on the paper
package. Typically, the print side is indicated by an arrow.
Moisture content
Moisture content is the amount of water left in the paper after manufacture. It is one of the important
characteristics of the paper. This can change greatly depending on the storage environment, although usually
paper contains about 5% water by weight. Because paper often absorbs water, the amount of water can
sometimes be about 10% in a high humidity environment. When the amount of water increases, the
characteristics of the paper changes greatly. The fixing of the toner may become worse. For storage of the
paper and during use, we recommend that the humidity of the surrounding environment be between 50% and
60%.
Rough estimate of basis weight
60
64
75
90
105
120
135
163
200
Paper size
Paper size
Letter
Legal
Executive
A4
A5
A5 (Long Edge)
A6
Envelope Monarch
Envelope Com-10
Envelope DL
Downloaded From ManualsPrinter.com Manuals
2
g/m
16
17
20
24
28
32
36
43
53
210 × 297 mm
148 × 210 mm
210 × 148 mm
105 × 148 mm
110 × 220 mm
lb
Bond
90
110
mm
8.5 × 11 in.
8.5 × 14 in.
7.25 × 10.5 in.
3.875 × 7.5 in.
4.12 × 9.5 in.
Appendix
0
0
0
Index
0
in.
138
A