Table of Contents
Advertisement
Noise caused by incorrect
CLOCK adjustment
[Adjustment]
1.
Select CLOCK in MENU2.
2.
Adjust DIV so that vertically striped noise on the picture will disappear.
3.
Select FINE in CLOCK.
4.
Adjust FINE finely so that snowy noise on the whole picture will disappear.
Normally adjust it within the range of 0 to 31. However, Set FINE in the range of 32 to 127 if V-
dancing appears by optimising FINE value.
3.5.2.5. WHITE ADJUST adjustment:
Adjusting the input level GAIN of analog signal.
[Adjustment]
1.
Input full-white video signal.
2.
Select AUTO WHITE in WHITE ADJUST in MENU2 and start AUTO WHITE.
[When "OVERFLOWED" is displayed]
OVERFLOWED will be dispayed if the input signal level is not in the adjustment range such as
when the level of input video signal is too high or too low, or full-white signal is not input. In such
cases, it is required to input the signal of the optimum level.
[Manual Adjustment]
Manual adjustment is possible in MANUAL WHITE menu if full-white video signal can not be
input. The value can be reset to the value adjusted at factory before shipping by pressing
NORMAL
NORMAL
NORMAL
NORMAL
button.
3.5.2.6. H-POSITION/V-POSITION adjustment
Adjusting the horizontal and vertical phase of input signal.
[Adjustment]
1.
Select H-POSITION in MENU2.
2.
Adjust so that all the horizontal pixels will be displayed.
3.
Select V-POSITION in MENU2.
4.
Adjust so that all the vertical pixels will be displayed.
Noise caused by incorrect
FINE adjustment
38
First edition
Advertisement
Table of Contents
