Table of Contents
Advertisement
3.2.3. Picture outline adjustment steps
Perform the picture outline adjustment roughly for each single
screen.
1.
After making the image size smaller than the outline of the
screen using the zoom axis, adjust TILT, V-POSI, and H-POSI
so that upper and lower spaces and right and left spaces
shifted by the 6-axis adjuster will be almost equalized
respectively with each other.
A=A', B=B'
2.
After forming the horizontal keystone distortion, adjust the
image position to the center of the screen with V-POSI.
3.
After forming the vertical keystone distortion, adjust the image position to the center of the
screen with H-POSI.
4.
Adjust the image size to the outline of the screen.
After adjusting roughly on each single screen, adjust finely
on the multi screen.
5.
Adjust finely so that each screen edge will link without
distance.
Form the horizontal keystone
distortion.
Form the vertical keystone
distortion.
32
A
Adjust the vertically shifted
image position to the center of
the screen.
Adjust the horizontally shifted
image position to the center of the
screen.
First edition
A '
B
B '
Advertisement
Table of Contents
