Adjusting 6 Axes - Mitsubishi VS-SH10U Setup And Installation Manual

3.2.2. Adjusting 6 axes

(In the case of using optional 6-axis adjuster, S-050AXI)
Loosen the 6 lock screws with the hexagon wrench (2mm) before the adjustment.
Adjust each axis with the hexagon wrench (3mm).
F: ZOOM
C: H-KEYS
A: TILT
1. Tilt the image.
2. Form the vertical keystone
distortion.
3. Form the horizontal keystone
distortion.
4. Adjust the vertical position.
5. Adjust the horizontal position.
6. Scale up/down the image.
VS-SH10U Set-up and Installation Manual
L
Adjustment screw
A: TILT
B: T/B PHASE
C: H-KEYS
D: V-POSI
E: H-POSI
F: ZOOM
31
E: H-POSI
D: V-POSI
B: T/B PHASE
View from the screen
Clockwise Counterclockwise