Buderus Logamax Plus GB142-24 Installation Instructions Manual page 8

2 Regulations and guidelines
(c) MANUFACTURERS REQUIREMENTS - GAS EQUIP-
MENT VENTING SYSTEM REQUIRED.
When the manufacturer of Product Approved side wall hori-
zontally mounted gas equipment provides a venting system
design or venting system components with the equipment,
the instructions provided by the manufacturer for the instal-
lation of the equipment and venting shall include:
1. Detailed instructions for the installation of the venting
system or the venting system components: and
2. A complete parts list for the venting system design or
venting system.
(d) MANUFACTURERS REQUIREMENTS - GAS EQUIP-
MENT VENTING SYSTEM NOT PROVIDED.
When the manufacturer of Product Approved side wall hori-
zontally vented gas fueled equipment does not provide the
parts for the venting of flue gases, but identifies "special
venting systems", the following requirements shall be satis-
fied by the manufacturer:
1. The referenced "special venting systems" shall be
included with the appliance or equipment installation
instructions: and
2. The "special venting systems" shall be Product
Approved by the Board, and the instructions for that
system shall include a parts list and detaild
installation instructions.
(e) A copy of all instructions for all Product Approved side
wall horizontally vented gas fueled equipment, all venting
instructions, all parts lists for venting instructions, and/or
venting design instructions shall remain with the appliance
or equipment at the completion of the installation.
8 Logamax plus GB142-24/30/45/60 - We reserve the right to make any changes due to technical modifications!