D3243-S Single 12V Operation - Min / Max Config [New] - Fujitsu D3231-S Technotes

Interfaces & Connectors
D3243-S Single 12V Operation – Min / Max Config [New]
3.23.3
Sample supply cabling for minimum single 12V configuration:
e.g. processor up to 45W, no PCIe card installed, no SATA drives
Note: Each single pin of both connectors is capable of max. 8A!
a
g
e
At least pin 9 & 10 or 9 & 11
must be connected to the
+12V supply source!
GND = any GND pin connected
to the supply source.
+12V
GND
(Single 12V PSU)
For processor ≥ 65W all pins of the 4-pin connector must
be used due to peak current in Turbo Mode.
TechNotes D323x-S_D3243-S V1.2
mainboards
Sample supply cabling for maximum single 12V configuration:
e.g. processor > 45W, additional graphics card, several SATA drives
Page 41 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards
All five +12V pins must be
in
connected to the +12V supply
source.
Both GND pins (4-pin conn.) &
any three GND pins (24-pin
connector) must be connected
to the supply source.
+12V
GND
(Single 12V PSU)