Bmc - Bios Default Settings D323X-S - Fujitsu D3231-S Technotes

System Monitoring
4.12 BMC – BIOS Default Settings D323x-S
The default system monitoring settings like fan speed, sensor influence, and Alert temperatures are fixed by the system BIOS.
All relevant settings can be customized by system builders via the SilentFanConfig-Manager tool kit.
Sensors PECI (Processor)

Fan1 (CPU)
Fan2
Fan3
Fan4/PSU
"X" indicates that this specific sensor influences the speed of this specific fan
StartUp
PECI (Processor)
Super I/O 50°C
PCIe Graphics 50°C
PCH 55°C
Memory 50°C
Core Regulator 60°C
1) If the sensor temperature is below "StartUp" the fan rotates a its defined minimum fan speed
2) Between "StartUp" and "FullSpeed" the fan speed increases linear
3) If the sensor temperature achieves "Alert", the system can provide a warning (e.g. via SystemGuard tool)
a
g
e
Super I/O PCIe Graphics
X
X
X
X
1) 2)
FullSpeed Alert
80 99
65°C
65°C
70°C
60°C
75°C
TechNotes
mainboards
PCH Memory
X X X
X X X
X X X
3)
Note
These settings are fixed by the BIOS (depends on the
99
individual installed processor) and cannot be changed via
SilentFanConfig-Manager.
70°C
These settings are implemented for the current
70°C
BIOS version and may be changed for upcoming
80°C
BIOS versions!
65°C
Default minimum fan speed = 30% (all fans).
80°C
D323x-S_D3243-S V1.2 Page 55 of 98
Core Regulator
X
X
X
X
http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards