b.
Battery
c.
Display Bezel
3.
Perform the following steps as shown in the illustration:
a. Disconnect the camera cable from the connector on the camera module [1].
b. Lift and remove the camera from the display assembly [2].
Installing the Camera
1.
Connect the camera cable to the connector on the camera module.
2.
Align the camera module in its position on the computer.
3.
Install:
a.
Display Bezel
b.
Battery
c.
Base Cover
4.
Follow the procedures in
Removing the System Board
1.
Follow the procedures in
2.
Remove:
a.
Base Cover
b.
Battery
c.
Hard Drive
d.
WLAN Card
e.
System Fan
f.
Keyboard
g.
Back Cover
h.
Heatsink
3.
Perform the following steps as shown in the illustration:
a. Lift the locking tab [1].
b. Disconnect the LED and touchpad cables [2].
32
After Working Inside Your
Before Working Inside Your
computer.
Computer.