5.
Perform the following steps as shown in the illustration:
a. Disconnect the display cable [1].
b. Unroute the cable from the slot [2].
6.
Perform the following steps as shown in the illustration:
a. Remove the screw that secures bottom cover to the computer [1].
b. Pry the edges of the back cover [2].
c. Lift the back cover [3].
Installing the Back Cover
1.
Place the back cover on the computer.
2.
Tighten the screw to secure the back cover to the computer.
3.
Route the display cable to the slot.
4.
Connect the display cable.
5.
Press the tab until the display cable is secured.
22