Installing the Hard Drive
1.
Connect the hard drive cable.
2.
Place the hard drive inside the computer.
3.
Tighten the screw that secures the hard drive to the computer.
4.
Install:
a.
Battery
b.
Base Cover
5.
Follow the procedures in
Removing the WLAN Card
1.
Follow the procedures in
2.
Remove:
a.
Base Cover
b.
Battery
3.
Perform the following steps as shown in the illustration:
a. Loosen the screw that secures the WLAN card to the computer [1].
b. Lift the tab in the direction indicated [2].
c. Disconnect the cables that connect the WLAN card to the computer [3].
12
After Working Inside Your
Before Working Inside Your
computer.
Computer.