Installing The Display Assembly; Removing The Display Bezel - Dell Latitude 3550 Owner's Manual

Installing the Display Assembly

1. Place the display assembly on the computer.
2. Tighten the screw to secure the display assembly to the computer.
3. Affix the adhesive tape.
4. Install:
a. Back Cover
b. Keyboard
c. System Fan
d. WLAN Card
e. Hard Drive
f. Battery
g. Base Cover
5. Follow the procedures in

Removing the Display Bezel

1. Follow the procedures in
2. Remove:
a. Base Cover
b. Battery
c. Hard Drive
d. WLAN Card
e. System Fan
f. Keyboard
g. Display Assembly
3. Perform the following steps as shown in the illustration:
a. Pry the edges of the display bezel [1].
After Working Inside Your
Before Working Inside Your
computer.
Computer.
27