Wireless Switch Board - HP Pavilion DV9500 Maintenance And Service Manual

Wireless switch board

Description
Wireless switch board (includes wireless switch board cable)
Before removing the wireless switch board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
f.
Top cover (see
g.
Remove the wireless switch board:
Release the ZIF connector to which the wireless switch board cable is connected and disconnect the
1.
wireless switch board cable (1) from the system board.
Remove the two silver Phillips PM2.5×5.0 screws (2) that secure the wireless switch board to the
2.
base enclosure.
80 Chapter 4 Removal and replacement procedures
Battery on page 47).
Hard drive on page 52)
Optical drive on page
Switch cover on page
Keyboard on page 63)
Speaker assembly on page
Display assembly on page
Top cover on page 75)
59)
61)
66)
69)
Spare part number
432991-001