Table of Contents
Advertisement
Remove the Bluetooth module:
Disconnect the Bluetooth module cable (1) from the system board.
1.
Remove the Bluetooth module (2) from the slot built into the base enclosure.
2.
Reverse the above procedure to install the Bluetooth module.
USB board
Description
USB board (includes USB board cable)
Before removing the USB board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Wireless module compartment cover (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
68
Chapter 4 Removal and replacement procedures
Battery on page
36).
Hard drive on page
37)
Optical drive on page
Keyboard on page
46)
Switch cover on page
WLAN module on page
44)
49)
Spare part number
417085-001
39)
ENWW
Advertisement
Table of Contents
