Table of Contents
Advertisement
TouchPad
Description
TouchPad (includes TouchPad bracket and TouchPad cable)
Before removing the TouchPad, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
WLAN cover (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
g.
Remove the TouchPad:
Turn the top cover upside down, with the front toward you.
1.
Remove the five Phillips PM2.0×3.0 screws (1) that secure the TouchPad assembly to the top cover.
2.
60
Chapter 4 Removal and replacement procedures
Battery on page
36).
Hard drive on page
37)
WLAN module on page
Optical drive on page
Keyboard on page
46)
Switch cover on page
Display assembly on page
Top cover on page
57)
39)
44)
49)
51)
Spare part number
451341-001
ENWW
Advertisement
Table of Contents
