®
Top End
Force™
Remove bolt from crescent link bracket A and carbon back B.
1.
2.
Adjust carbon back to desired angle aligning the hole with the
crescent link bracket with the hole in the carbon back.
3.
Insert bolt into hole in crescent link bracket A and carbon back
B.
4.
Tighten securely.
54
5.11 Replacing the Bolted-on Headrest
Remove the four mounting bolts and nuts A from the headrest
1.
B and back C.
Align holes in new headrest B with holes in back C.
2.
Insert the four mounting bolts A through the four holes in the
3.
back C and headrest B and secure with the four nuts.
4.
Tighten securely.
1171790-B