Kyocera FS-C8500DN Operation Manual page 28

2-2
Downloaded From ManualsPrinter.com Manuals
Changing Network Interface Parameters
This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP,
SSL Server and the IPSec protocols and Security Level.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC
and your network environment.
For details of the procedure, refer to the Using the Operation Panel on
page 4-1.
Menu Submenu
Network TCP/IP Set.
Security Network Security
Note After all network related settings have been done, turn the
machine OFF and ON again. This is mandatory to make the
settings effective!
TCP/IP
IPv4 DHCP
Setting
Auto-IP
IP Address
Subnet Mask
Default
Gateway
Bonjour
IPv6 TCP/IP(IPv6)
Setting
RA(Sateless)
DHCPv6
Netware
AppleTalk
IPP
SSL SSL
Setting
IPP over SSL
HTTPS
IPSec
Printing Operation
Setting
On/Off
On/Off
On/Off
IP address
IP address
IP address
On/Off
On/Off
On/Off
On/Off
Off/On
Frame type
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off