Kyocera FS-C8500DN Operation Manual page 170

Service Setting: a b
1
Service Status
2 Network Status
3 Test Page
Print.
Are you sure?
z Service Status
[ Yes
4-114
Downloaded From ManualsPrinter.com Manuals
Service Setting (for Maintenance)
The options available in Service are as follows:
• Service Status (Printing the service status page)
• Network Status (Printing the network status page)
• Test Page (Printing the test page)
• DEV-CLN (Developer/Refresh mode setting)
• Drum (Drum/Refresh mode setting)
• LSU (LSU cleaning mode setting)
• MP Tray Cleaning (MP Tray Cleaning mode setting)
• Silent Mode (Silent Mode setting)
• First Print Pos. (First Print Position setting)
• Initialization (System initialization)
IMPORTANT Service is primarily a menu used by service personnel
for maintenance work. There is no need for customers to use this
menu.
1
2
[ Exit ]
Service Status (Printing the service status page)
The service status page contains printer settings information that is more
detailed than the standard status page and is therefore mostly for service
purposes. However, there is a great deal of information on the service
status page that may be useful to you.
1
2
] [ No ]
In the Adjust/Maint. menu screen, press
Setting.
Press [OK]. The Service Setting menu screen appears.
In the Service Setting menu, press
Status.
Press [OK]. A confirmation screen appears.
If Job Accounting is enabled, a confirmation screen appears after
department login.
Press [Yes] ([Left Select]). Accepted. appears and printing
begins.
Pressing [No] ([Right Select]) returns you to the Service
Setting menu screen without printing the service status page.
or to select Service
or to select Service
Using the Operation Panel