Kyocera FS-C8500DN Operation Manual page 114

Duplex:
1 *Off
2
Bind Long Edge
3
Bind Short Edge
Paper Output:
1 *TopTray FaceDown
2
Tray A Face Down
3 Tray B Face UP
4-58
Downloaded From ManualsPrinter.com Manuals
2
Press [OK]. The Duplex screen appears showing the list of
a b
available duplex printing modes.
3
Press or
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
4
Press [OK]. The duplex printing mode is set and the Print Settings
menu reappears.
Paper Output (Selecting the Paper Output Location)
This setting can be specified when an optional document finisher is
installed.
You can select whether print jobs are output to the top tray of the printer,
or to the optional document finisher or mail box.
Note The screen varies depending on the installed options.
1
In the Print Settings menu, press
2
Press [OK]. The Paper Output screen appears showing the
a b
available output locations.
Note The screen shown appears when a 3,000 Sheet Document
Finisher is installed.
3
Press or
The available output locations are as follows:
3,000 Sheet Document Finisher installed
TopTray FaceDown (default)
Tray A Face Down
Tray B Face UP
Tray B Face Down
Tray C Face UP
Tray C Face Down
Tray 1 Face UP*
Tray 1 Face Down*
Tray 2 Face UP*
Tray 2 Face Down*
to select the desired duplex printing mode.
or
to select the desired output location.
Using the Operation Panel
to select Paper Output.