Code Alarm ca6154 Professional Series Installation Manual page 40

4
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the
ci J
button one time will unlock
only the driver's door. Press
ci J
again within three seconds to unlock the remaining
doors.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the
ci J
button for 3
seconds will open the vehicle's trunk or hatch.
Activating the AUX 1 Output (Optional)
If this feature is enabled on your system, pressing the
@
and
ci J
buttons
simultaneously will activate an optional feature. This feature can be programmed for a
wide range of functions like power window or sunroof automation, please consult your
installing dealer to determine the functionality of your system.
Using the Progressive Car Finder Feature
Press the
~>))
button to locate your vehicle. The system will flash the parking lights
and sound 5 times at low volume, increasing in volume each time the button is
pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the
~>))
button for 3 seconds to activate the personal protection alarm.
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter's @ and
ci J
buttons can be used to lock and unlock the door (if the
option is installed). To stop the alarm, press and hold the
~>))
button on the transmitter
again for 3 seconds. The system will automatically stop after 30 seconds.
Programmed Transmitter Notification
As a security precaution each time the vehicle's ignition is turn on the status LED
light with flash the number of transmitters programmed into the system. This helps
to identify unauthorized transmitters from accessing your vehicle. If you believe an
unauthorized transmitter has been programmed to your system, contact your installing
dealer for assistance.
ca6154 Owners revA