Code Alarm ca6154 Professional Series Installation Manual page 30

30
8 - Gas I Diesel: Selects engine type and delay time for the starter output wire during
remote start activation.
Gas - Gasoline engine, no delay for the starter output wire.
1 0 Second Delay - Diesel engine, delays the starter output wire for 1 0
seconds after the ignition has been powered up by the remote start.
15 Second Delay - Diesel engine, delays the starter output wire for 15
seconds after the ignition has been powered up by the remote start.
20 Second Delay - Diesel engine, delays the starter output wire for 20
seconds after the ignition has been powered up by the remote start.
45 Second Delay - Diesel engine, delays the starter output wire for 45
seconds after the ignition has been powered up by the remote start.
9- Single I Double Pulse Start: Switches the remote start activation between a
single or double press from the transmitter.
10 - Ignition 2 Output Pnik/White: Programmable high current output.
Ignition 2 - Output becomes active with the same timing as the ignition
output and does not drop out during crank.
Accessory - Output becomes active with the same timing as the accessory
output, drops out during crank.
Start
I
Crank - Output becomes active with the same timing as the starter
output wire, during crank only.
11 -2 or 3 Hour Start: When activated, the remote start will activate and run for the
programmed time and shut down every 2 or 3 hours.
12- Turbo Timer: When activated, the vehicle will run for the programmed time.
OFF 1 Minute 3 Minutes 5 Minutes
13 - Transmission Mode: Select the type of remote start activation based on the
vehicle's transmission type.
Automatic - For use with automatic transmission vehicles. Standard remote
start operation.
Manual - For use with manual transmission vehicles. Remote start ready mode
must be set upon exit of vehicle to enable remote start.
14- Temperature Start: Not available on this model.
ca6154 Install revA