Page 1
Remote Vehicle Control System CA 421 Owner's Manual Remote Vehicle Starter IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.
Page 2
REMOTE STARTING THE VEHICLE: The system WILL NOT start the vehicle if any one of the following situations exist: 1. The vehicle's hood is opened. 2. The gear shift selector is not in Park. 3. The brake pedal is depressed. 1.
Page 3
TRANSMITTER PROGRAMMING: If the need arises for programming of additional or replacement transmitters, simply follow the 4 steps outlined below: 1. Turn the ignition to the ON position. 2. Press and release the programming switch 3 times. 3. Press and hold the button of the transmitter you wish to add for 3 seconds.
Page 4
Code Systems, Inc. Limited Lifetime Warranty Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGI- NALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts directly related to repairs of the defect(s).
Page 6
Code Systems, Inc. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Need help?
Do you have a question about the CA 421 and is the answer not in the manual?
Questions and answers