All-In-One Printer Home Center Software; Home Center For Windows - Kodak ESP 9 User Manual

All-in-One printer Home Center software

Home Center for Windows

a
If you acknowledge the error message by pressing OK , the light will go off.
However, if the Wi-Fi radio is not turned off and the printer cannot establish a
connection to an existing Wi-Fi network, the light will resume blinking, and the error
message will display again.
Kodak Home Center software is installed on your computer during the setup
process. The software functionality for Windows or Macintosh users is described
below.
Once installed, Kodak All-in-One printer Home Center software allows you to print,
copy, scan, and configure your All-in-One printer from your Windows XP or Vista
computer.
To open the Home Center software window on your computer, use the Home Center
icon on the Desktop or in the Start Menu.
From the All-in-One printer Home Center main menu, selecting one of the six menu
items enables you to:
• Scan pictures and documents
• Enhance and copy pictures
• Enhance and print images
• Configure settings for printing, copying, and scanning from the control panel
• Access the Kodak Tips and Projects Center Web site
• Order supplies from the Kodak Web site
The functions of the three small icons located in the upper-right corner of the Home
Center window are shown below:
Returns you to the main Home Center window
Displays the Status Monitor
Displays a Help panel for the Home Center software
www.kodak.com/go/aiosupport
Kodak ESP 9 All-in-One printer
19