Loading envelopes
Loading legal size paper
WARNING: Do not load envelopes with cutouts or cellophane windows in this
printer.
NOTE: Review
Things to keep in mind, page
1. Remove all other paper from the paper tray you plan to use.
2. Place one or more envelopes along the right edge of the paper tray, with the
front side down and the envelope flaps pointing toward the left side of the tray.
3. Squeeze the paper edge guide and move it to the right until it just touches the
loaded envelope(s).
4. Close the paper tray and lower the paper output tray.
1. Remove all other paper from the bottom tray.
2. Press and hold the paper tray extension-release, located on the inside of the
front of the bottom paper tray.
www.kodak.com/go/aiosupport
Kodak ESP 9 All-in-One printer
44.
47