Installation - McIntosh C15 Owner's Manual

Installation

The C15 can be placed upright on a table or shelf, standing
on its four feet. It also can be custom installed in a piece of
furniture or cabinet of your choice. The required panel cut-
out, ventilation cutout and unit dimensions are shown.
Always provide adequate ventilation for your C15. Cool
operation ensures the longest possible operating life for
any electronic instrument. Do not install the C15 directly
above a heat generating component such as a high powered
amplifier. If all the components are installed in a single
cabinet, a quiet running ventilation fan can be a definite
asset in maintaining all the system components at the
Front View of the C15
custom installed
Side View of the C15
custom installed
Bottom View of the C15 cus-
tom installed
coolest possible operating temperature.
ing minimum spacing dimensions for cool operation. Allow
at least 1-1/2 inches (3.8cm) above the unit so airflow is
not obstructed. Allow 17-1/2 inches (44.5cm) depth behind
the mounting panel, which includes clearance for connec-
tors. Allow 1-1/8 inches (2.9cm) in front of the mounting
panel for knob clearance. Be sure to cut out a ventilation
hole in the mounting shelf according to the dimensions in
the drawing.
@qÃ8hƒ†
"( %Å
(€€
7‚‡‡‚€Ã‚sÃ8ˆ‡‚ˆ‡ÃhqÃU‚ƒ
‚sÃTˆƒƒ‚…‡ÃTurysÃHˆ†‡
8‚vpvqr
H‚ˆ‡vtÃTˆ…shpr
TvqrÃWvr
Tˆƒƒ‚…‡ÃTurys
H‚ˆ‡vtÃTˆ…shpr
%Å
A custom cabinet installation should provide the follow-
& !Å
###€€
&  %Å
#""#€€
#Å
%€€
QhryÃCrvtu‡
ÃÃÃ"  %ÅÃÃ
ÃÃÃ"Ã !ÅÃÃ
ÃÃ&&'€€
ÃÃ''(€€
" %Å
$ €€
Pˆ‡yvrÂsÃVv‡
8ˆ‡ÃPˆ‡Ã8r‡r…
s‚…ÃWr‡vyh‡v‚
$Å
7‚‡‡‚€ÃWvr
(Å
Installation
Pˆ‡yvrÂsÃA…‚‡ÃQhry
@qtrÂsÃ8ˆ‡‚ˆ‡
A…‚‡ÃWvr
Tˆƒƒ‚…‡ÃTurys
H‚ˆ‡vtÃ7…hpxr‡Ãh‡Ã7‚‡uÃTvqr†Ã‚sÇurÃSrh…ÃQhry
Ah†‡rÃv‡uÃ%"!ÑÃ"'ÃHhpuvrÃTp…rÃhqÃXh†ur…Ç‚Ã8uh††v†
Ah†‡rÃv‡uÃ%Ñà !ÃX‚‚qÃTp…rÃhqÃXh†ur…Ç‚ÃTˆƒƒ‚…‡ÃTurys
&"!Å
$"€€
5