Specifications - McIntosh C15 Owner's Manual

Specifications

Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
Total Harmonic Distortion
0.002% From 20Hz to 20,000Hz
Signal To Noise Ratio
Phono, 90dB below a 10mV input, (84db IHF)
High Level, 105dB below rated output, (95db IHF)
Maximum Voltage Output
Phono, 90mV
High Level, 10V
Output Impedance
600 ohms
Sensitivity
Phono, 2.5mV for 2.5V rated output (0.5mV IHF)
High Level, 250mV for 2.5V rated output (50mV IHF)
Input Impedance
Phono, 47K ohms, 65pF
High Level, 22K ohms
Maximum Input Signal
Phono, 90mV
High Level, 10V
Tone Controls
Bass Control ± 12dB @20Hz
Treble Control ± 12dB @20kHz
Power Requirements
100 Volts, 50/60Hz at 25 watts.
110 Volts, 50/60Hz at 25 watts.
120 Volts, 50/60Hz at 25 watts.
220 Volts, 50/60Hz at 25 watts.
230 Volts, 50/60Hz at 25 watts.
240 Volts, 50/60Hz at 25 watts.
NOTE: Refer to the rear panel of the C15 for the correct voltage
14
Dimensions
17-1/2” (44.5cm) W, 5-3/8” (13.7cm) H, 17-1/2” (44.5cm)
D, (including clearance for connectors)
Weight
14.5 pounds ( 6.6 Kg) net, 29.5 pounds (13.4 Kg) in ship-
ping carton
Specifications