Operation; Weighing; Taring (Tare Key) - KERN ECE Operating Instruction

7 Operation

7.1 Weighing

• The balance is switched on by pressing the "ON/OFF" key.
•
The balance performs auto-diagnostics (for 2 s) and then displays "0.00".
• If the weighing object is heavier than the weighing range the display indicates
"E" (=Overload).
• The balance is switched off by pressing the "ON/OFF" key once.

7.2 Taring (TARE key)

• Switch the balance with the "ON/OFF" key on and wait until display appears
as "0.00". Position the tare load and press the "TARE" key.
• The balance display becomes "0.00".
• The item to be weighed can now be placed in the tare container and the
weight can be read off.
12 ECE-BA-e-0711