Bayer HealthCare Contour Next Link User Manual page 7

Set Language
LANGUAGE
English
OK
Deutsch
Español
Language:
English
OK
No
Connect to Pump
CONNECT TO PUMP
Connect to a MiniMed
OK
Pump?
Skip
CONNECT TO PUMP
Enter this Meter ID
Next
into your Pump:
123456
Go Back
This screen displays the meter ID (in the bottom left corner).
This ID is needed to complete the connection process.
Put down your meter. Pick up the compatible Medtronic device
and continue with Step 7.
MAIN MENU
Basal
Reservoir + Set
Utilities
6
3. Press the M button to see
more language choices.
When your language is
highlighted, press OK.
4. Press OK to confirm.
If the correct language is
not displayed, press No.
5. If you are connecting to a
MiniMed pump now, press
OK and go to Step 6. If
not, press SKIP and go to
Step 17.
NOTE: Pump refers
to your compatible
Medtronic device.
6. STOP. Do NOT press
ANY buttons.
7. Press ACT to go
to the MAIN MENU.
Scroll to Utilities by
pressing the down
arrow. Press ACT.
8. Scroll to Connect Devices and press
UTILITIES MENU
Alarm Clock
ACT.
Connect Devices
Block
Then scroll to Meters and press ACT.
DEVICE OPTIONS
Meters
Remotes
Other Devices
NOTE: If your UTILITIES MENU does not contain Connect
Devices, scroll to Meter Options and press ACT.
9. Select On and press ACT. If you are
METER OPTION
Off
replacing a meter, go to Step 10. If
On
you are adding a new meter, go to
Step 12.
10. To replace a meter, select Delete ID and
METER ID MENU
Add ID
press ACT.
Delete ID
Review ID
11. If you have multiple meter IDs, repeat
DELETE METER ID
1. aaaaaa
Step 10 for each one.
2. bbbbbb
3. ------
12. To add a new meter, select Add ID and
METER ID MENU
Add ID
press ACT. Refer to Step 6 (or see
Delete ID
meter back) to find meter ID (SN).
Review ID
Use the up and down arrow buttons to
ADD METER ID
enter the six character meter ID shown
1 2 3 4 5 6
on the meter screen.
Press ACT after each character entry.
¯
7